Nl> (Line Terminator) - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual
Oscilloscopes
Hide thumbs
Also See for InfiniiVision 3000 X-Series:
- Programmer's manual (1232 pages) ,
- User manual (440 pages) ,
- Service manual (162 pages)
Table of Contents
Advertisement
Syntax Elements
•
•
•
•
•
•
•
•
•
•
•
Number Format
NR1 specifies integer data.
NR3 specifies exponential data in floating point format (for example,
- 1.0E- 3).
<NL> (Line Terminator)
<NL> = new line or linefeed (ASCII decimal 10).
The line terminator, or a leading colon, will send the parser to the "root"
of the command tree.
[ ] (Optional Syntax Terms)
Items enclosed in square brackets, [ ], are optional.
{ } (Braces)
When several items are enclosed by braces, { }, only one of these elements
may be selected. Vertical line ( | ) indicates "or". For example, {ON | OFF}
indicates that only ON or OFF may be selected, not both.
::= (Defined As)
::= means "defined as".
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
"Number Format"
on page 157
"<NL> (Line Terminator)"
"[ ] (Optional Syntax Terms)"
"{ } (Braces)"
on page 157
"::= (Defined As)"
on page 157
"< > (Angle Brackets)"
"... (Ellipsis)"
on page 158
"n,..,p (Value Ranges)"
"d (Digits)"
on page 158
"Quoted ASCII String"
"Definite- Length Block Response Data"
on page 157
on page 157
on page 158
on page 158
on page 158
on page 158
Commands Quick Reference
4
157
Advertisement
Chapters
Table of Contents
