Measure:xmin - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

20
:MEASure Commands

:MEASure:XMIN

Command Syntax
:MEASure:XMIN [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:XMIN command installs a screen measurement and starts
an X- at- Min- Y measurement on the selected window. If the optional source
parameter is specified, the current source is modified.
:MEASure:XMIN is an alias for :MEASure:TMIN.
N O T E
Query Syntax
:MEASure:XMIN? [<source>]
The :MEASure:XMIN? query measures and returns the horizontal axis
value at which the minimum vertical value occurs. If the optional source is
specified, the current source is modified. If all channels are off, the query
returns 9.9E+37.
Return Format
<value><NL>
<value> ::= horizontal value of the minimum in NR3 format
See Also
•
•
•
468
(see page 1138)
"Introduction to :MEASure Commands"
":MEASure:XMAX" on page 467
":MEASure:TMIN" on page 1071
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 406