:SAVE:MULTi[:STARt]
Command Syntax
:SAVE:MULTi[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:MULTi[:STARt] command saves multi- channel waveform data to
a file. This file can be opened by the N8900A InfiniiView oscilloscope
analysis software.
If a file extension is provided as part of a specified <file_name>, it must be ".h5".
N O T E
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
"Introduction to :SAVE Commands"
":SAVE:FILename"
on page 609
":SAVE:PWD"
on page 619
:SAVE Commands
on page 607
26
617