Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 314

14
:DVM Commands
:DVM:MODE
Command Syntax
:DVM:MODE <dvm_mode>
<dvm_mode> ::= {ACRMs | DC | DCRMs | FREQuency}
The :DVM:MODE command sets the digital voltmenter (DVM) mode:
• ACRMs — displays the root- mean- square value of the acquired data,
• DC — displays the DC value of the acquired data.
• DCRMs — displays the root- mean- square value of the acquired data.
• FREQuency — displays the frequency counter measurement.
Query Syntax
:DVM:MODE?
The :DVM:MODE? query returns the selected DVM mode.
Return Format
<dvm_mode><NL>
<dvm_mode> ::= {ACRM | DC | DCRM | FREQ}
See Also •
•
•
•
•
314
(see page 1138)
with the DC component removed.
":DVM:ENABle" on page 312
":DVM:SOURce" on page 315
":DVM:ARANge" on page 310
":DVM:CURRent" on page 311
":DVM:FREQuency" on page 313
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide