Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 323

Control functions in the measurement/storage module. See
:FUNCtion Commands"
Table 88 :FUNCtion Commands Summary
Command
:FUNCtion:BUS:CLOCk
<source> (see
page 328)
:FUNCtion:BUS:SLOPe
<slope> (see
page 329)
:FUNCtion:BUS:YINCrem
ent <value> (see
page 330)
:FUNCtion:BUS:YORigin
<value> (see
page 331)
:FUNCtion:BUS:YUNits
<units> (see
page 332)
:FUNCtion:DISPlay {{0
| OFF} | {1 | ON}}
(see page 333)
:FUNCtion[:FFT]:CENTe
r <frequency> (see
page 334)
:FUNCtion[:FFT]:SPAN
<span> (see page
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
16
:FUNCtion Commands
Query
:FUNCtion:BUS:CLOCk?
(see page 328)
:FUNCtion:BUS:SLOPe?
(see page 329)
:FUNCtion:BUS:YINCrem
ent? (see page
:FUNCtion:BUS:YORigin
? (see page
:FUNCtion:BUS:YUNits?
(see page 332)
:FUNCtion:DISPlay?
(see page 333)
:FUNCtion[:FFT]:CENTe
r? (see page
:FUNCtion[:FFT]:SPAN?
335) (see page 335)
on page 326.
Options and Query Returns
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<slope> ::= {NEGative | POSitive
| EITHer}
<value> ::= value per bus code,
330) in NR3 format
<value> ::= value at bus code =
331) 0, in NR3 format
<units> ::= {VOLT | AMPere |
NONE}
{0 | 1}
<frequency> ::= the current
334) center frequency in NR3 format.
The range of legal values is from
0 Hz to 25 GHz.
<span> ::= the current frequency
span in NR3 format.
Legal values are 1 Hz to 100 GHz.
s1
"Introduction to
323