Sbus<N>:A429:Source - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SBUS<n>:A429:SOURce
Command Syntax
:SBUS<n>:A429:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:A429:SOURce command sets the source of the ARINC 429
signal.
Query Syntax
:SBUS<n>:A429:SOURce?
The :SBUS<n>:A429:SOURce? query returns the currently set source of the
ARINC 429 signal.
Use the :TRIGger:LEVel:HIGH and :TRIGger:LEVel:LOW commands to set
the thresold levels for the selected source.
Return Format
<source><NL>
See Also •
•
•
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":TRIGger:LEVel:HIGH"
":TRIGger:LEVel:LOW"
":TRIGger:MODE" on page 886
":SBUS<n>:MODE" on page 633
":SBUS<n>:A429:TRIGger:TYPE"
":SBUS<n>:A429:SIGNal"
":SBUS<n>:A429:SPEed"
":SBUS<n>:A429:FORMat"
"Introduction to :TRIGger Commands"
on page 884
on page 885
on page 650
on page 642
on page 644
on page 641
on page 877
27
:SBUS<n> Commands
643