Sre (Service Request Enable); Stb (Read Status Byte); Trg Trigger; Tst (Self Test) - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

4
Commands Quick Reference
Table 2 Common (*) Commands Summary (continued)
Command
*SRE <mask> (see
page 180)
n/a
*TRG (see page 184)
n/a
*WAI (see page 186)
78
Query
*SRE? (see page 181)
*STB? (see page 182)
n/a
*TST? (see page 185)
n/a
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
<mask> ::= sum of all bits that
are set, 0 to 255; an integer in
NR1 format. <mask> ::= following
values:
Bit Weight Name Enables
--- ------ ---- ----------
7 128 OPER Operation Status Reg
6 64 ---- (Not used.)
5 32 ESB Event Status Bit
4 16 MAV Message Available
3 8 ---- (Not used.)
2 4 MSG Message
1 2 USR User
0 1 TRG Trigger
<value> ::= 0 to 255; an integer
in NR1 format, as shown in the
following:
Bit Weight Name "1" Indicates
--- ------ ---- ---------------
7 128 OPER Operation status
condition occurred.
6 64 RQS/ Instrument is
MSS requesting service.
5 32 ESB Enabled event status
condition occurred.
4 16 MAV Message available.
3 8 ---- (Not used.)
2 4 MSG Message displayed.
1 2 USR User event
condition occurred.
0 1 TRG A trigger occurred.
n/a
<result> ::= 0 or non-zero value;
an integer in NR1 format
n/a