27
:SBUS<n> Commands
:SBUS<n>:UART:POLarity
Command Syntax
:SBUS<n>:UART:POLarity <polarity>
<polarity> ::= {HIGH | LOW}
The :SBUS<n>:UART:POLarity command selects the polarity as idle low or
idle high for the serial decoder and/or trigger when in UART mode.
Query Syntax
:SBUS<n>:UART:POLarity?
The :SBUS<n>:UART:POLarity? query returns the current UART polarity
setting.
Return Format
<polarity><NL>
<polarity> ::= {HIGH | LOW}
See Also
•
•
•
766
(see
page
1138)
"Introduction to :TRIGger Commands"
":TRIGger:MODE"
on page 886
":SBUS<n>:UART:TRIGger:TYPE"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 877
on page 774