Set Macauthentication Portinitialize - Enterasys Matrix 2G4072-52 Configuration Manual

Security Configuration Command Set
Configuring MAC Authentication

14.3.7.11 set macauthentication portinitialize

Use this command to force one or more MAC authentication ports to re-initialize and remove any
currently active sessions on those ports.
set macauthentication portinitialize port-string
Syntax Description
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to force ge.2.1 through 5 to initialize:
Matrix(rw)->set macauthentication portinitialize ge.2.1-5
14-92 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the MAC authentication port(s) to re-initialize.
For a detailed description of possible port-string values,
refer to Section 4.1.1.