Identification Data; Installation Location - Siemens SIMATIC ET 200SP Operating Instructions Manual

Electric shock and fire hazard from damaged device
A damaged device can carry dangerous voltage and trigger a fire in the machine or plant. A
damaged device has unpredictable properties and states.
Death or severe injury could occur.
Make sure that the damaged device is not installed and commissioned accidentally. Label the
damaged device correspondingly and keep it locked up. Have the device repaired without delay.
5.3

Identification data

The identification data can be used to clearly identify the device when a repair is necessary.
The activation code for Windows is already integrated in the supplied image.
Note the following data:
• Printed on the nameplate of the device, please find the following information:
– Article number
– Serial number
– The first and the last MAC address
• Depending on the scope of delivery, the "Certificate‑of‑License" is provided as proof of
license.
Valid for the following products:
– S7‑1500 Software Controller CPU 1505SP
– S7‑1500 Software Controller CPU 1505SP F/T/TF
• The "Microsoft Windows Product Key" can be found on the "Certificate of Authenticity" label.
5.4

Installation location

Introduction
Install the CPU 1515SP PC2 in a suitable housing/control cabinet with sufficient mechanical
strength, fire protection and at least IP54 degree of protection according to EN 60529, and take
into consideration the ambient conditions for operating the devices.
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
WARNING
Application planning
5.4 Installation location
35