System Configuration - Omron CS1W-NC113 Manual

System Configuration

CX-Position
(Available Soon)
1-2 System Configuration
Type of data
Positioning sequences, speeds, positions
Acceleration times, deceleration times
Dwell times
Zones
These data items are transferred to the PCU for use. Once they have been trans-
ferred to the PCU they can be saved to the PCU's flash memory, so there is no
need for battery maintenance.
Note There is a limit to the service life of the flash memory. A total of up to 100,000 data
saving operations can be performed.
The PCU is compatible with the Windows-based NC Support Tool (CX-Position)
that enables setting of the PCUs in a Windows environment. Using the
CS1-series single-port multi-access function, creation and transfer of parame-
ters and data for PCUs as well as operation monitoring are possible from the
same environment as the software used for CPU Unit ladder programming (CX-
Programmer).
The PCU receives control signals (CW limit, CCW limit, origin, origin proximity,
emergency stop, and external interrupt input signals) from devices and a control
panel, and outputs pulse trains to stepping motor drivers and servo motor drives.
Section
Number of data items per axis
100
9
19
3
1-2
3