System Configuration - Omron SYSMAC C200H-ASC02 Operation Manual

System Configuration

1-3 System Configuration
If the ASCII Unit is plugged into either of the 2 CPU Backplane slots next to
the CPU Unit, it will not be possible to mount a Host Link Unit or a Program-
ming Device, such as a Programming Console. Before mounting the ASCII
Unit, the DIP switches must be set. Make sure that the power supply to the
PC is turned OFF during installation of the ASCII Unit. A personal computer
used for entering the BASIC program should be connected to Port 1 and oth-
er peripheral I/O devices such as a printer or a display terminal can be con-
nected to Port 2 (refer to the following diagram). For more detailed informa-
tion on peripheral interface connections and timing, refer to Appendix B
Specifications.
C200H-ASC02
Port 1 (RS-232C)
Laptop
Personal Computer
Computer
Section 1-3
C200H PC
Port 1/Port 2 (RS-232C)
Input Output
Bar-code reader
Printer
Plasma Display
7