Omron CS1W-NC113 Manual page 47

Wiring
Outputting CW and CCW
Pulses, Example 1
Position Control Unit
(open collector output)
24-VDC
input
CW pulse
output
CCW pulse
output
34
In this example, a 5-VDC photocoupler input motor drive is used for outputting
CW and CCW pulses.
24-VDC
power
supply
+
A1/B1
1.6 kΩ
A6/B6
Approx.
12 mA
1.6 kΩ
A8/B8
Approx.
12 mA
A2/B2
Note In this example, the 1.6 kΩ resistors of the PCU are used to allow a 24-VDC
power supply to be used with a motor drive rated at 5 VDC.
When wiring your system, carefully note the current required by the motor drive
in order to avoid damaging the input circuitry of the motor drive.
--
Section
Motor drive (for 5-VDC input)
(For example R=220 Ω)
+
--
+
--
3-4