I/O Circuitry - Omron CS1W-NC113 Manual

External I/O Circuitry
1, 2, 3...
Cover Dimensions

3-3-3 I/O Circuitry

Outputs (Open Collector Output)
The following connectors (Fujitsu 360 Jack) can be used:
1. FCN-361J048-AU (solder-type)
FCN-360C048-D (connector cover)
2. FCN-363J048 (crimp-type housing)
FCN-363J-AU/S (contact)
FCN-360C048-D (connector cover)
3. FCN-367J048-AU (crimp type)
Cable holder
Constant
voltage
circuit
1.6k Ω (1/2W)
1.6 kΩ (1/2W)
1.6 kΩ (1/2W)
Note Output Circurity:
The pulse output and error counter reset circuitry of the PCU are provided with
Output power supply, 24 VDC
Output GND, 24 VDC
CW pulse/pulse output
(with 1.6 kΩ resistance)
CW pulse output
CCW pulse/direction output
(with 1.6 kΩ resistance)
CCW pulse/direction output
Note Output switching depends on the
axis parameter settings. (Refer to
4-3 Axis Parameter Area.)
Error counter reset output (with 1.6 kΩ
resistance)
Origin-adjustment command output (with
1.6 kΩ resistance)
Error counter reset output
Origin-adjustment command output
Section 3-3
See
note.
29