Test System Hardware; Clean The Touchscreen - Polycom RealPresence Trio 8500 User Manual

Poly TRIO 8500 | 8800

Test System Hardware

The system administrator may ask you to access a diagnostics menu on the system to test its hardware.
You can test the system's microphones, speaker, handset, third-party headset (if present), keypad
mappings, touchscreen, and LEDs. See your system administrator for instructions on how to perform these
tests.
1. Navigate to
2. Select one of the following options and follow the prompts:
Audio Diagnostics

Display Diagnostics

 Touch Screen Diagnostics

Clean the Touchscreen

The touchscreen on the systems requires minor maintenance, but you may periodically need to clean the
touchscreen. Use a clean, dry, microfiber cloth—the kind you would use to clean glass surfaces—to wipe
the touchscreen.
Before cleaning the screen, disable it so you don't activate system functions while you wipe the
touchscreen.
1. Navigate to
2. Wipe the screen with a clean and dry microfiber cloth.
3. Tap the screen to enable the touchscreen again.
Note: If the screen is still dirty after cleaning, dampen a soft, lint-free cloth with an isopropyl
alcohol and water solution of 50:50, and then wipe the screen with the cloth. Always use the
dampened cloth to apply the solution; never apply the solution directly, which could seep
inside the screen and cause staining.
the touchscreen.
GoMomentum.com
Settings > Status > Diagnostics > Test
Settings > Basic > Screen
Hardware.
Clean.
Never use chemicals or cleaning solutions to clean
45
User Guide
888.538.3960