Show Vlan Access-Map - Cisco Nexus 5500 Series Command Reference Manual

show vlan access-map

show vlan access-map
To display all VLAN access maps or a VLAN access map, use the show vlan access-map command.
Syntax Description
map-name
Command Default The switch shows all VLAN access maps, unless you use the map-name argument to select a specific
access map.
Command Modes EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
For each VLAN access map displayed, the switch shows the access map name, the ACL specified by the
match command, and the action specified by the action command.
Use the show vlan filter command to see which VLANs have a VLAN access map applied to them.
Examples This example shows how to display a specific VLAN access map:
switch# show vlan access-map vlan1map
This example shows how to display all VLAN access maps:
switch# show vlan access-map
Vlan access-map vacl-mac
switch#
Related Commands Command
action
match
show vlan filter
vlan access-map
vlan filter
Cisco Nexus 5500 Series NX-OS Security Command Reference
338
show vlan access-map [map-name]
(Optional) VLAN access map to show.
Modification
This command was introduced.
match mac: acl-mac
action: forward
statistics per-entry
Description
Specifies an action for traffic filtering in a VLAN access map.
Specifies an ACL for traffic filtering in a VLAN access map.
Displays information about how a VLAN access map is applied.
Configures a VLAN access map.
Applies a VLAN access map to one or more VLANs.
Chapter Show Commands
OL-27883-02