Show Ip Bgp Route-Map - Cisco Nexus 3548 Command Reference Manual

show ip bgp route-map

show ip bgp route-map
To display the Border Gateway Protocol (BGP) route maps from the BGP table, use the show ip bgp
route-map command.
Syntax Description route-map-name
vrf vrf-name
all
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the BGP route maps from the BGP table:
switch(config)# show ip bgp route-map
Related Commands Command
route-map
clear ip bgp
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
454
show ip bgp route-map route-map-name [vrf {vrf-name | all}]
Route map name.
(Optional) Specifies the virtual router context (VRF) name. The name can
be any case-sensitive, alphanumeric string up to 32 characters.
(Optional) Specifies all VRF instances.
Modification
This command was introduced.
Description
Creates route maps.
Clear BGP routes from the BGP table.
Chapter Unicast Routing Show Commands
OL-27852-01