Show Qos Map - Cisco 300 Series Cli Manual

39
781
•
out-dscp—Specifies up to 8 DSCP mapped values, separated by spaces.
(Range: 0–63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP value is
mapped to the same DSCP value.
Command Mode
Global Configuration mode
User Guidelines
This is the only map that is not globally configured. It is possible to have several
maps and assign each one to a different port.
Example
The following example changes DSCP values 1, 2, 4, 5 and 6 to DSCP Mutation
Map value 63
.
switchxxxxxx(config)# qos map dscp-mutation

39.34 show qos map

Use the show qos map Privileged EXEC mode command to display the various
types of QoS mapping.
Syntax
show qos map [dscp-queue | dscp-dp | policed-dscp | dscp-mutation]
Parameters
•
dscp-queue—Displays the DSCP to queue map.
•
dscp-dp—Displays the DSCP to Drop Precedence map.
•
policed-dscp—Displays the DSCP to DSCP remark table.
•
dscp-mutation—Displays the DSCP-DSCP mutation table.
Quality of Service (QoS) Commands
1 2 4 5 6 to 63
OL-32830-01 Command Line Interface Reference Guide