Show Dot1X - Cisco Catalyst 3650 series Command Reference Manual

show dot1x

To display IEEE 802.1x statistics, administrative status, and operational status for the switch or for the specified
port, use the show dot1x command in user EXEC mode.
show dot1x [all [count | details | statistics | summary]] [interface type number [details | statistics]] [statistics]
Syntax Description
all
count
details
statistics
summary
interface type number
Command Modes
User EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples This is an example of output from the show dot1x all command:
Device# show dot1x all
Sysauthcontrol
Dot1x Protocol Version
This is an example of output from the show dot1x all count command:
Device# show dot1x all count
Number of Dot1x sessions
-------------------------------
Authorized Clients
UnAuthorized Clients
Total No of Client
This is an example of output from the show dot1x all statistics command:
Device# show dot1x statistics
Dot1x Global Statistics for
(Optional) Displays the IEEE 802.1x information for all
interfaces.
(Optional) Displays total number of authorized and unauthorized
clients.
(Optional) Displays the IEEE 802.1x interface details.
(Optional) Displays the IEEE 802.1x statistics for all interfaces.
(Optional) Displays the IEEE 802.1x summary for all interfaces.
(Optional) Displays the IEEE 802.1x status for the specified port.
Enabled
3
= 0
= 0
= 0
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show dot1x
Modification
This command was introduced.
815