Show Dot1X - Cisco Catalyst 2950 Command Reference Manual

show dot1x

show dot1x
Use the show dot1x privileged EXEC command to display IEEE 802.1x statistics, administrative status,
and operational status for the switch or for the specified interface.
Syntax Description all
interface interface-id
statistics [interface
interface-id]
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(6)EA2
12.1(14)EA1
Usage Guidelines If you do not specify an interface, global parameters and a summary appear. If you specify an interface,
details for that interface appear.
If you specify the statistics keyword without the interface interface-id option, statistics appear for all
interfaces. If you specify the statistics keyword with the interface interface-id option, statistics appear
for the specified interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples These are examples of output from the show dot1x and the show dot1x all privileged EXEC commands:
Switch# show dot1x
Sysauthcontrol
Supplicant Allowed In Guest Vlan
Dot1x Protocol Version
Dot1x Oper Controlled Directions
Dot1x Admin Controlled Directions = Both
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-322
show dot1x [all] | [interface interface-id] | [statistics [interface interface-id]] [ | {begin | exclude
| include} expression]
(Optional) Display the IEEE 802.1x status for all interfaces.
(Optional) Display the IEEE 802.1x status for the specified interface.
(Optional) Display IEEE 802.1x statistics for the switch or the specified
interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The all keyword was added.
Chapter 2
= Enabled
= Disabled
= 1
= Both
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01