Show Dot1X - Cisco Catalyst 2950 Command Reference Manual

show dot1x

show dot1x
Use the show dot1x privileged EXEC command to display the 802.1X statistics, administrative status,
and operational status for the switch or for the specified interface.
Syntax Description interface interface-id
statistics [interface
interface-id]
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
If you do not specify an interface, global parameters and a summary appear. If you specify an interface,
details for that interface appear.
If you specify the statistics keyword without the interface interface-id option, statistics appear for all
interfaces. If you specify the statistics keyword with the interface interface-id option, statistics appear
for the specified interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show dot1x command:
Switch# show dot1x
Global 802.1X Parameters
Catalyst 2950 Desktop Switch Command Reference
2-146
show dot1x [interface interface-id] | [statistics [interface interface-id]] [ | {begin | exclude |
include} expression]
(Optional) Display the 802.1X status for the specified port.
(Optional) Display 802.1X statistics for the switch or the specified interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
reauth-enabled
reauth-period
quiet-period
tx-period
supp-timeout
server-timeout
reauth-max
max-req
no
3600
60
30
30
30
2
2
Chapter 2 Cisco IOS Commands
78-11381-05