The following commands apply to IPv4 and IPv6:
•
advertise-interval
•
description
•
disable
•
hold-time
•
preempt
•
priority
•
show config
•
virtual-address
clear counters vrrp ipv6
Clear the counters recorded for IPv6 VRRP groups.
S4810
Syntax
clear counters vrrp ipv6 [vrid | vrf instance]
Parameters
vrid
vrf instance
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.10.0
Version 8.4.1.0
Version 8.3.2.0
1756
(OPTIONAL) Enter the number of an IPv6 VRRP group. The
range is from 1 to 255.
(OPTIONAL) E-Series only: Enter the name of a VRF instance
(32 characters maximum) to clear the counters of all IPv6
VRRP groups in the specified VRF.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on E-Series ExaScale, C-Series, and S-Series.
Support was added for IPv6 VRRP groups in non-default VRF
instances.
Introduced on the E-Series TeraScale.
Virtual Router Redundancy Protocol (VRRP)