Dell S4810 Reference Manual page 1750

200.200.200.207 ... short desc
Gi 10/37 254 254 Y Master 200.200.200.200 200.200.200.204
200.200.200.205
Dell>
Usage The following describes the show vrrp command shown in the following
Information
example.
Item
GigabitEthernet
12/3...
State: master...
Hold Down:...
Adv rcvd:...
Virtual MAC
address
Virtual IP address
Authentication:...
Tracking states..
1750
Description
Displays the Interface, the VRRP group ID, and the network
address. If the interface is not sending VRRP packets, 0.0.0.0
appears as the network address.
Displays the interface's state:
• Na/If (not available)
• master (MASTER virtual router)
• backup (BACKUP virtual router)
the interface's priority and the IP address of the MASTER.
This line displays additional VRRP configuration information:
• Hold Down displays the hold down timer interval in
seconds.
• Preempt displays TRUE if preempt is configured and
FALSE if preempt is not configured.
• AdvInt displays the Advertise Interval in seconds.
This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements
received on the interface.
• Adv sent displays the number of VRRP advertisements
sent on the interface.
• Gratuitous ARP sent displays the number of gratuitous
ARPs sent.
Displays the virtual MAC address of the VRRP group.
Displays the virtual IP address of the VRRP router to which
the interface is connected.
States whether authentication is configured for the VRRP
group. If it is, the authentication type and the password are
listed.
This line is displayed if the track command is configured
on an interface. Below this line, the following information
on the tracked interface is displayed:
• Dn or Up states whether the interface is down or up.
Virtual Router Redundancy Protocol (VRRP)