Description - Dell S4810 Reference Manual

description

Enables you to specify a descriptive name for a customer VRF.
S4810
Syntax
description string
To delete the descriptive name for a customer VRF, use the no description
string command.
Parameters
string
Defaults None.
Command VRF MODE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage
Use this command to specify a descriptive name for a VRF.
Information
ip vrf forwarding
Enables you to attach an interface to a VRF.
S4810
Syntax
ip vrf forwarding {vrf-name | management}
To delete an interface associated with a configured VRF, use the no ip vrf
forwarding {vrf-name | management} command.
Parameters
vrf-name
management
Defaults None (Interface is part of default VRF).
Command INTERFACE-CONFIG
Modes
1704
Enter a descriptive name for the VRF.
Introduced on the S-Series.
Enter the name of the VRF that you want to create.
Enter the name of the management VRF.
Virtual Routing and Forwarding (VRF)