Creating A Time Range; Chapter 3 Ipv6 Acl Configuration; Configuring A Basic Ipv6 Acl - H3C S5500-EI series Operation Manual

Operation Manual – ACL
H3C S5500-EI Series Ethernet Switches

Chapter 3 IPv6 ACL Configuration

When configuring IPv6 ACLs, go to these sections for information you are interested in:

Creating a Time Range

Configuring a Basic IPv6 ACL

Configuring an Advanced IPv6 ACL
Copying an IPv6 ACL
Displaying and Maintaining IPv6 ACLs
IPv6 ACL Configuration Example
3.1 Creating a Time Range
Refer to section
3.2 Configuring a Basic IPv6 ACL
Basic IPv6 ACLs filter packets based on source IPv6 address. They are numbered in
the range 2000 to 2999.
3.2.1 Configuration Prerequisites
If you want to reference a time range to a rule, define it with the time-range command
first.
3.2.2 Configuration Procedure
Follow these steps to configure a basic IPv6 ACL:
To do...
Enter system view
Create and enter
basic IPv6 ACL
view
Creating a Time Range.
Use the command...
system-view
acl ipv6 number
acl6-number [ name
acl6-name ]
[ match-order { auto |
config } ]
3-1
Chapter 3 IPv6 ACL Configuration
Remarks
––
Required
The default match order is config.
If you specify a name for an IPv6
ACL when creating the ACL, you
can use the acl ipv6 name
acl6-name command to enter the
view of the ACL later.