H3C S5500-EI series Operation Manual page 1135

Operation Manual – SNMP-RMON
H3C S5500-EI Series Ethernet Switches
Configure an SNMP agent
group
Convert the user-defined
plain text password to a
cipher text password
Add a new user to an
SNMP agent group
Configure the maximum
size of an SNMP packet
that can be received or
sent by an SNMP agent
Configure the engine ID
for a local SNMP agent
Create or update the MIB
view content for an SNMP
agent
Follow these steps to configure SNMPv1 and SNMPv2c:
Enter system view
Enable SNMP Agent
To do...
snmp-agent group v3
group-name
[ authentication |
privacy ] [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl
acl-number ]
snmp-agent
calculate-password
plain-password mode
{ md5 | sha }
{ local-engineid |
specified-engineid
string }
snmp-agent usm-user
v3 user-name
group-name [ [ cipher ]
authentication-mode
{ md5 | sha }
auth-password
[ privacy-mode { aes128
| des56 } priv-password ] ]
[ acl acl-number ]
snmp-agent packet
max-size byte-count
snmp-agent
local-engineid engineid
snmp-agent mib-view
{ excluded | included }
view-name oid-tree
[ mask mask-value ]
To do...
system-view
snmp-agent
Use the command...
Use the command...
1-4
Chapter 1 SNMP Configuration
Remarks
Required
Optional
Required
If the cipher keyword is
specified, the arguments
auth-password and
priv-password are
considered as cipher text
password.
Optional
1,500 bytes by default
Optional
Company ID and device
ID by default
Optional
MIB view name is
ViewDefault and OID is 1
by default.
Remarks
—
Required
Disabled by default
You can enable SNMP
Agent through this
command or any
commands that begin with
snmp-agent.