H3C S5500-EI series Operation Manual page 1243

Operation Manual – Information Center
H3C S5500-EI Series Ethernet Switches
[Sysname] info-center enable
# Specify the host with IP address 1.2.0.1/16 as the log host, use channel loghost to
output log information (optional, loghost by default), and specify local5 as the logging
facility.
[Sysname] info-center loghost 1.2.0.1 channel loghost facility local5
# Disable the output of log, trap, and debugging information of all modules on the
channel loghost.
[Sysname] info-center source default channel loghost debug state off log state
off trap state off
Caution:
As the default system configurations for different channels are different, you need to
disable the output of log, trap, and debugging information of all modules on the
specified channel (loghost in this example) first and then configure the output rule as
needed so that unnecessary information will not be output.
# Configure the information output rule: allow log information of all modules with
severity equal to or higher than informational to be output to the log host.
[Sysname] info-center source default channel loghost log level informational
state on
2) Configuring the log host
Step 1: Issue the following commands as a root user.
# mkdir /var/log/MyDevice
# touch /var/log/MyDevice/information
Step 2: Edit the file /etc/syslog.conf as a root user and add the following selector/action
pair.
# MyDevice configuration messages
local7.info /var/log/MyDevice/information
1-18
Chapter 1 Information Center Configuration