Configuring An Acl; Creating A Time Range - H3C S7500E Series Configuration Manual

Creating a Time Range

Configuring an IPv4 basic ACL
Configuring an IPv4 advanced ACL
Configuring an Ethernet Frame Header ACL
Copying an IPv4 ACL
IPv6 ACL configuration task list
Complete the following tasks to configure an IPv6 ACL:
Creating a Time Range
Configuring an IPv6 basic ACL
Configuring an IPv6 Advanced ACL
Configuring an Ethernet Frame Header ACL
Copying an IPv6 ACL

Configuring an ACL

Creating a Time Range
Follow these steps to create a time range:
To do...
Enter system view
Create a time range
You may create time ranges identified with the same name. They are regarded as one time range
whose active period is the result of ORing periodic ones, ORing absolute ones, and ANDing periodic
and absolute ones.
You may create a maximum of 256 uniquely named time ranges, each with 32 periodic time ranges at
most and 12 absolute time ranges at most.
Task
Task
Use the command...
system-view
time-range time-range-name
{ start-time to end-time days
[ from time1 date1 ] [ to time2
date2 ] | from time1 date1 [ to
time2 date2 ] | to time2 date2 }
1-6
Remarks
Optional
Optional
Remarks
Optional
Optional
Remarks
––
Required
By default, no time range exists.