Protocols And Standards; Lldp Configuration Tasks List - H3C S5500-EI series Operation Manual

Operation Manual – LLDP
H3C S5500-EI Series Ethernet Switches
2) IEEE 802.3 defined LLDP TLVs include the following:
MAC/PHY configuration/status TLV, which carries port configuration, such as port
speed, duplex state, whether port speed auto-negotiation is supported, the state of
auto-negotiation, current speed , and current duplex state.
Power via MDI TLV, which carries information about power supply capabilities.
Link aggregation TLV, which carries the capability and state of link aggregation.
Maximum frame size TLV, which carries the maximum frame size supported,
namely, MTU (maximum transmission unit).
III. MED related LLDP TLVs
LLDP-MED capabilities TLV, which carries the MED type of the current device and
the types of the LLDP MED TLVs that can be encapsulated in LLDPDUs.
Network policy TLV, which carries port VLAN ID, supported applications (such as
voice and video services), application priority, and the policy adopted.
Extended power-via-MDI TLV, which carries the information about the power
supply capability of the current device.
Hardware revision TLV, which carries the hardware version of an MED device.
Firmware revision TLV, which carries the firmware version of an MED device.
Software revision TLV, which carries the software version of an MED device.
Serial number TLV, which carries the serial number of an MED device.
Manufacturer name TLV, which carries the manufacturer name of an MED device.
Model name TLV, which carries the model of an MED device.
Asset ID TLV, which carries the asset ID of an MED device. Asset ID is used for
directory management and asset tracking.
Location identification TLV, which carries the location identification of a device.
Location identification can be used in location-based applications.
Note:
For detailed information about LLDP TLV, refer to IEEE 802.1AB-2005 and
ANSI/TIA-1057.

1.1.4 Protocols and Standards

IEEE 802.1AB-2005, Station and Media Access Control Connectivity Discovery
ANSI/TIA-1057, Link Layer Discovery Protocol for Media Endpoint Devices

1.2 LLDP Configuration Tasks List

Complete these tasks to configure LLDP:
1-4
Chapter 1 LLDP Configuration