H3C S5500-EI series Operation Manual page 1211

Operation Manual – File System Management
H3C S5500-EI Series Ethernet Switches
Log onto the remote FTP
server directly in user
view
Log onto the remote FTP
server indirectly in FTP
client view
2.2.2 Configuring the FTP Client
After a device serving as the FTP client has established a connection with the FTP
server (For establishing FTP connection, refer to
device can perform the following operations for the authorized directory:
Display help information
of FTP-related commands
supported by the remote
FTP server
Enable information
display in a detailed
manner
Use other username to
relog after logging onto
the FTP server
successfully
Enable FTP client
debugging
Set the file transfer mode
to ASCII
Set the file transfer mode
to binary
Change the working path
on the remote FTP server
Exit the current directory
and enter the upper level
directory
Display files/directories
information on the FTP
server
To do...
ftp ipv6 [ server-address
[ service-port ] [ source ipv6
source-ipv6-address ] [ -i
interface-type interface-number ] ]
ftp ipv6
open ipv6 server-address
[ service-port ] [ -i interface-type
interface-number ]
To do...
remotehelp
[ protocol-command ]
verbose
user username
[ password ]
debugging
ascii
binary
cd pathname
cdup
dir [ remotefile [ localfile ] ]
Use the command...
Establishing an FTP
Use the command...
2-4
Chapter 2 FTP Configuration
Remarks
Use either
approach.
Available in
user view
Connection.), the
Remarks
Optional
Optional
Enabled by default
Optional
Optional
Disabled by default
Optional
ASCII by default
Optional
ASCII by default
Optional
Optional
Optional