Other Functions Supported By Port Mirroring; Configuring Local Port Mirroring - H3C S5500-EI series Operation Manual

Hide thumbs Also See for S5500-EI series:
Table of Contents

Advertisement

Operation Manual – Port Mirroring
H3C S5500-EI Series Ethernet Switches
Destination device
Destination device contains destination mirroring port, and remote destination port
mirroring groups are created on destination devices. Upon receiving a mirrored packet,
the destination device checks to see if the VLAN ID of the received packet is the same
as that of the remote mirroring VLAN of the remote destination port mirroring group. If
yes, the destination device forwards the packet to the monitoring device through the
destination mirroring port.

1.1.3 Other Functions Supported by Port Mirroring

In addition, in a port mirroring group, a destination port can monitor multiple source
ports simultaneously in the mirroring group.

1.2 Configuring Local Port Mirroring

Follow these steps to configure local port mirroring:
Enter system view
Create a local mirroring
group
Add ports
to the port
mirroring
group as
source
ports
Add a port
to the
mirroring
group as
the
destination
port
To do...
system-view
mirroring-group group-id
local
mirroring-group group-id
In system
mirroring-port
view
mirroring-port-list { both |
inbound | outbound }
interface interface-type
interface-number
[ mirroring-group group-id ]
In
mirroring-port { both |
interface
inbound | outbound }
view
quit
In system
mirroring-group group-id
view
monitor-port monitor-port-id
interface interface-type
interface-number
In
interface
[ mirroring-group group-id ]
view
monitor-port
Chapter 1 Port Mirroring Configuration
Use the command...
1-3
Remarks
Required
Use either approach.
You can add ports to a
port mirroring group as
source ports in either
system view or
interface view.
In system view, you
can add multiple ports
to a port mirroring
group at one time.
While in interface view,
you can only add the
current port to a port
mirroring group.
Use either approach.
You can add a
destination port to a
port mirroring group in
either system view or
interface view. They
achieve the same
purpose.

Advertisement

Table of Contents
loading

Table of Contents