Displaying And Maintaining Ipv4 Acls; Ipv4 Acl Configuration Example - H3C S5500-EI series Operation Manual

Operation Manual – ACL
H3C S5500-EI Series Ethernet Switches
Caution:
The source IPv4 ACL and the destination IPv4 ACL must be of the same type.
The generated ACL does not take the name of the source IPv4 ACL.

2.6 Displaying and Maintaining IPv4 ACLs

Display information about a
specified or all IPv4 ACLs
Display information about ACL
uses of a switch
Display the configuration and state
of a specified or all time ranges
Clear statistics about a specified
or all IPv4 ACLs that are
referenced by upper layer
software

2.7 IPv4 ACL Configuration Example

2.7.1 Network Requirements
As shown in
Configure an ACL to deny access of all departments but the President's office to the
salary query server during office hours (from 8:00 to 18:00) in working days.
To do...
Figure 2-1, a company interconnects its departments through the switch.
Chapter 2 IPv4 ACL Configuration
Use the command...
display acl { acl-number |
all | name acl-name }
display acl resource
display time-range
{ time-name | all }
reset acl counter
{ acl-number | all | name
acl-name }
2-9
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in user
view