H3C S5500-EI series Operation Manual page 1036

Hide thumbs Also See for S5500-EI series:

Table of Contents

Operation Manual – ACL

H3C S5500-EI Series Ethernet Switches

# Configure traffic behavior b_rd to deny matching packets.

[Switch] traffic behavior b_rd

[Switch-behavior-b_rd] filter deny

[Switch-behavior-b_rd] quit

# Configure class c_market for packets matching IPv4 ACL 3001.

[Switch] traffic classifier c_market

[Switch-classifier-c_market] if-match acl 3001

[Switch-classifier-c_market] quit

# Configure traffic behavior b_ market to deny matching packets.

[Switch] traffic behavior b_market

[Switch-behavior-b_market] filter deny

[Switch-behavior-b_market] quit

# Configure QoS policy p_rd to use traffic behavior b_rd for class c_rd.

[Switch] qos policy p_rd

[Switch-qospolicy-p_rd] classifier c_rd behavior b_rd

[Switch-qospolicy-p_rd] quit

# Configure QoS policy p_market to use traffic behavior b_market for class c_market.

[Switch] qos policy p_market

[Switch-qospolicy-p_market] classifier c_market behavior b_market

[Switch-qospolicy-p_market] quit

# Apply QoS policy p_rd to interface GigabitEthernet 1/0/2.

[Switch] interface GigabitEthernet 1/0/2

[Switch-GigabitEthernet1/0/2] qos apply policy p_rd inbound

[Switch-GigabitEthernet1/0/2] quit

# Apply QoS policy p_market to interface GigabitEthernet 1/0/3.

[Switch] interface GigabitEthernet 1/0/3

[Switch-GigabitEthernet1/0/3] qos apply policy p_market inbound

Chapter 2 IPv4 ACL Configuration

Chapters

Table of Contents