Copying An Ipv6 Acl - H3C S5500-EI series Operation Manual

Operation Manual – ACL
H3C S5500-EI Series Ethernet Switches
3.3.3 Configuration Examples
# Create IPv6 ACL 3000 to permit the TCP packets with the source address
2030:5060::9050/64 to pass.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule permit tcp source 2030:5060::9050/64
# Verify the configuration.
[Sysname-acl6-adv-3000] display acl ipv6 3000
Advanced IPv6 ACL
ACL's step is 5
rule 0 permit tcp source 2030:5060::9050/64

3.4 Copying an IPv6 ACL

This feature allows you to copy an existent IPv6 ACL to generate a new one, which is of
the same type and has the same match order, match rules, rule numbering step and
descriptions as the source IPv6 ACL.
3.4.1 Configuration Prerequisites
Make sure that the source IPv4 ACL exists while the destination IPv4 ACL does not.
3.4.2 Configuration Procedure
Follow these steps to copy an IPv6 ACL:
Enter system view
Copy an existing IPv6
ACL to generate a new
one of the same type
Caution:
The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
The generated IPv6 ACL does not take the name of the source IPv6 ACL.
3000, named -none-, 1 rule,
To do...
system-view
acl ipv6 copy { source-acl6-number |
name source-acl6-name } to
{ dest-acl6-number | name
dest-acl6-name }
Chapter 3 IPv6 ACL Configuration
Use the command...
3-5
Remarks
—
Required