H3C S5500-EI series Operation Manual page 1460

Operation Manual – LLDP
H3C S5500-EI Series Ethernet Switches
Roll time
Number of neighbors
Number of MED neighbors
Number of sent optional TLV
Number of received unknown TLV
# Tear down the link between Switch A and Switch B and then display the global LLDP
status and port LLDP status on Switch A.
<SwitchA> display lldp status
Global status of LLDP : Enable
The current number of neighbors : 1
Neighbor information last changed time : 0 days, 0 hours, 5 minutes, 20 seconds
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 0 [GigabitEthernet1/0/1] :
Port status of LLDP
Admin status
Trap flag
Roll time
Number of neighbors
Number of MED neighbors
Number of sent optional TLV
Number of received unknown TLV
Port 1 [GigabitEthernet1/0/2] :
Port status of LLDP
Admin status
Trap flag
Roll time
Number of neighbors
Number of MED neighbors
Number of sent optional TLV
Number of received unknown TLV
: 0s
: 1
: 0
: 0
: 3
: 30s
: 4
: 2s
: 2s
: 5s
: 3
: Enable
: Rx_Only
: No
: 0s
: 1
: 1
: 0
: 5
: Enable
: Rx_Only
: No
: 0s
: 0
: 0
: 0
: 0
1-13
Chapter 1 LLDP Configuration