Setting To Output System Information To The Log Buffer - H3C S5500-EI series Operation Manual

Operation Manual – Information Center
H3C S5500-EI Series Ethernet Switches
Configure the output rules
of the system information
Configure the format of
the time stamp

1.2.6 Setting to Output System Information to the Log Buffer

Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output
to the log buffer and
specify the buffer size
Configure the output rules
of the system information
To do...
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
To do...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center logbuffer
[ channel
{ channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
Chapter 1 Information Center Configuration
Use the command...
Use the command...
1-12
Remarks
Optional
Refer to Table 1-4 for the
output rules of the system
information.
Optional
The time stamp format for
log, trap and debugging
information is date by
default.
Remarks
—
Optional
Enabled by default.
Optional
Refer to Table 1-2 for
default channel names.
Optional
System information is
output to the log buffer by
default with a default
channel of channel 4
(known as logbuffer) and
a default buffer size of
512.
Optional
Refer to Table 1-4 for the
output rules of the system
information.