Configuring The Http Test - H3C S5500-EI series Operation Manual

Operation Manual – NQA
H3C S5500-EI Series Ethernet Switches
Configure the operation
type
Configure a login
username
Configure a login
password
Specify a file to be
transferred between the
FTP server and the FTP
client
Configure common
optional parameters

1.6.4 Configuring the HTTP Test

The HTTP test is used to test the connection with a specified HTTP server and the time
required to obtain data from the HTTP server.
I. Configuration prerequisites
Before performing an HTTP test, you need to configure the HTTP server.
II. Configuring the HTTP test
Follow these steps to configure the HTTP test:
Enter system view
Enter NQA test group
view
Configure the test type as
HTTP and enter test type
view
To do... Use the command...
operation { get | put }
username name
password password
filename file-name
Refer to
Optional Parameters
Common to an NQA Test
Group
To do...
system-view
nqa entry admin-name
operation-tag
type http
Configuring
Use the command...
1-10
Chapter 1 NQA Configuration
Remarks
Optional
By default, the operation
type for the FTP is get, that
is, obtaining files from the
FTP server.
Required
By default, no login
username is configured.
Required
By default, no login
password is configured.
Required
By default, no file is
specified.
Optional
Remarks
—
—
Required