H3C S5500-EI series Operation Manual page 1150

Operation Manual – SNMP-RMON
H3C S5500-EI Series Ethernet Switches
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64
256-511: 0
event to start logging after the event is triggered.
<Sysname> system-view
[Sysname] rmon event 1 log owner 1-rmon
# Configure an alarm group to sample received bytes on GigabitEthernet 1/0/1. When
the received bytes exceed the upper or below the lower limit, logging is enabled.
[Sysname] rmon alarm 1 1.3.6.1.2.1.16.1.1.1.4.1 delta rising-threshold 1000
1 falling-threshold 100 1 owner 1-rmon
[Sysname] display rmon alarm 1
Alarm table 1 owned by 1-rmon is VALID.
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
: 0
: 0
: 0 , 65-127
, 512-1023: 0
: delta
: 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
: 10(sec)
: 1000(linked with event 1)
: 100(linked with event 1)
: risingOrFallingAlarm
: 2552
, etherStatsOversizePkts
, etherStatsJabbers
, etherStatsCollisions
: 0 , 128-255
, 1024-1518: 0
2-7
Chapter 2 RMON Configuration
: 0
: 0
: 0
: 0
# Create an