H3C S5500-EI series Operation Manual page 1066

Operation Manual – QoS
H3C S5500-EI Series Ethernet Switches
To do...
Enter system view
Enter
port
view or
port
group
view
Apply an
associated policy
Note that, when you apply a policy by using the qos apply policy command, whether
or not the inbound/outbound keyword can take effect depends on the actions defined
in the traffic behavior, as described in
Table 3-3 The support for the inbound direction and the outbound direction
Traffic accounting
TP
Traffic filtering
Traffic mirroring
Configuring the outer
VLAN tag
Traffic redirecting
Remarking the customer
network VLAN ID for
packets
Remarking the 802.1p
precedence for packets
Remarking the drop
precedence for packets
Remarking the DSCP
precedence for packets
Remarking the IP
precedence for packets
Remarking the local
precedence for packets
Use the command...
system-view
Enter
interface interface-type
port
interface-number
view
Enter
port-group { manual
port
port-group-name |
group
aggregation agg-id }
view
qos apply policy
policy-name { inbound |
outbound }
Action
Supported
Supported
Supported
Supported
Supported
Supported
Not supported
Supported
Supported
Supported
Supported
Supported
Chapter 3 QoS Policy Configuration
—
Perform either of the two
operations.
The configuration performed
in Ethernet port view applies to
the current port only. The
configuration performed in
port group view applies to all
the ports in the port group.
Required
Table 3-3.
Inbound
3-8
Remarks
Outbound
Supported
Supported
Supported
Supported
Not supported
Not supported
Supported
Supported
Not supported
Supported
Supported
Not supported