Defining A Policy; Applying A Policy - H3C S5500-EI series Operation Manual

Operation Manual – QoS
H3C S5500-EI Series Ethernet Switches
2) Configuration procedure
# Enter system view.
<Sysname> system-view
# Create the traffic behavior (This operation leads you to traffic behavior view).
[Sysname] traffic behavior test
# Configure TP action for the traffic behavior.
[Sysname-behavior-test] car cir 640

3.4.4 Defining a Policy

A policy associates a class with a traffic behavior. Each traffic behavior is comprised of
a group of QoS actions. A device executes these QoS actions in the order they are
defined.
Follow these steps to associate a traffic behavior with a class:
Enter system view
Create a policy (This operation
leads you to policy view)
Specify the traffic behavior for
a class
Note:
In a QoS policy with multiple class-to-traffic-behavior associations, if the action of
creating an outer VLAN tag, the action of setting customer network VLAN ID, or the
action of setting service provider network VLAN ID is configured in a traffic behavior, we
recommend you not to configure any other action in this traffic behavior. Otherwise, the
QoS policy may not function as expected after it is applied.

3.4.5 Applying a Policy

I. Configuration procedure
Follow these steps to apply a policy on a port:
To do...
Chapter 3 QoS Policy Configuration
Use the command...
system-view
qos policy policy-name
classifier classifier-name
behavior behavior-name
3-7
Remarks
—
—
Required