Collaboration Between The Track Module And The Detection Modules; Collaboration Between The Track Module And The Application Modules; Track Configuration Task List - H3C S5500-EI series Operation Manual

Operation Manual – Track
H3C S5500-EI Series Ethernet Switches

1.1.1 Collaboration Between the Track Module and the Detection Modules

You can establish the collaboration between the Track module and the detection
modules through configuration. A detection module probes the link status and informs
the Track module of the probe result. The Track module then changes the status of the
Track object accordingly:
If the probe succeeds, the status of the corresponding Track object is Positive;
If the probe fails, the status of the corresponding Track object is Negative.
At present, the detection modules that can collaborate with the Track module include
the Network Quality Analyzer (NQA) only. Refer to NQA Configuration for details of
NQA.

1.1.2 Collaboration Between the Track Module and the Application Modules

You can establish the collaboration between the Track module and the application
modules through configuration. If the status of the Track object changes, the Track
module tells the application modules to deal with the change accordingly.
At present, the application modules that can collaborate with the Track module include:
VRRP
Static routing

1.2 Track Configuration Task List

To implement the collaboration function, you need to establish collaboration between
the Track module and the detection modules, and between the Track module and the
application modules.
Complete these tasks to configure Track module:
Configuring Collaboration
Between the Track Module
and the Detection Modules
Configuring Collaboration
Between the Track Module
and the Application Modules
Task
Configuring Track-NQA
Collaboration
Configuring Track-VRRP
Collaboration
Configuring Track-Static Routing
Collaboration
1-2
Chapter 1 Track Configuration
Remarks
Required
Use either
approach