H3C S5500-EI series Operation Manual page 1299

Operation Manual – NQA
H3C S5500-EI Series Ethernet Switches
Enter test type view of
a test group
Configure the
descriptive string for a
test group
Configure the interval
between two
consecutive tests for a
test group
Configure the number
of probes in a test
Configure the NQA
probe timeout time
Configure the
maximum number of
history records that
can be saved in a test
group
Configure the
maximum number of
hops a probe packet
traverses in the
network
Configure the ToS field
in an IP packet header
in an NQA probe
packet
Enable the routing
table bypass function
To do... Use the command...
type { dhcp | dlsw | ftp
| http | icmp-echo |
snmp | tcp | udp-echo
| udp-jitter }
description string
frequency interval
probe count times
probe timeout timeout
history-records
number
ttl value
tos value
route-option
bypass-route
—
Optional
By default, no descriptive string
is available for a test group.
Optional
By default, the interval between
two consecutive tests for a test
group is 0 milliseconds, that is,
only one test is performed.
If the last test is not completed
when the interval specified by
the frequency command is
reached, a new test is not
started.
Optional
By default, one probe is
performed in a test.
Optional
By default, the timeout time is
3000 milliseconds.
This parameter is not available
for a UDP-jitter test.
Optional
50 by default.
Optional
20 by default.
This parameter is not available
for a DHCP test.
Optional
0 by default.
This parameter is not available
for a DHCP test.
Optional
Disabled by default.
This parameter is not available
for a DHCP test.
1-21
Chapter 1 NQA Configuration
Remarks