H3C S5500-EI series Operation Manual page 1062

Operation Manual – QoS
H3C S5500-EI Series Ethernet Switches
Form
acl ipv6
access-list-numb
er
any
customer-dot1p
8021p-list
customer-vlan-i
d vlan-id-list
destination-ma
c mac-address
dscp dscp-list
ip-precedence
ip-precedence-lis
t
protocol
protocol-name
service-dot1p
8021p-list
service-vlan-id
vlan-id-list
source-mac
mac-address
Specifies an IPv6 ACL to match IPv6 packets. The
access-list-number argument is in the range 2000 to 3999.
In a class configured with the operator and, the logical
relationship between rules defined in the referenced IPv6 ACL is
or.
Specifies to match all packets.
Specifies to match packets by 802.1p precedence of the
customer network. The 8021p-list argument is a list of CoS
values. You can provide up to eight space-separated CoS
values for this argument. CoS is in the range 0 to 7.
Specifies to match the packets of specified VLANs of user
networks. The vlan-id-list argument specifies a list of VLAN IDs,
in the form of vlan-id to vlan-id or multiple discontinuous VLAN
IDs (separated by space). You can specify up to eight VLAN IDs
for this argument at a time. VLAN ID is in the range 1 to 4094.
In a class configured with the operator and, the logical
relationship between the customer VLAN IDs specified for the
customer-vlan-id keyword is or.
Specifies to match the packets with a specified destination MAC
address.
Specifies to match packets by DSCP precedence. The dscp-list
argument is a list of DSCP values. You can provide up to eight
space-separated DSCP values for this argument. DSCP is in the
range of 0 to 63.
Specifies to match packets by IP precedence. The
ip-precedence-list argument is a list of IP precedence values.
You can provide up to eight space-separated IP precedence
values for this argument. IP precedence is in the range 0 to 7.
Specifies to match the packets of a specified protocol. The
protocol-name argument can be IP or IPv6.
Specifies to match packets by 802.1p precedence of the service
provider network. The 8021p-list argument is a list of CoS
values. You can provide up to eight space-separated CoS
values for this argument. CoS is in the range 0 to 7.
In a class configured with the operator and, the logical
relationship between the service VLAN IDs specified for the
service-vlan-id keyword is or.
Specifies to match the packets of the VLANs of the operator's
network. The vlan-id-list argument is a list of VLAN IDs, in the
form of vlan-id to vlan-id or multiple discontinuous VLAN IDs
(separated by space). You can specify up to eight VLAN IDs for
this argument at a time. VLAN ID is in the range of 1 to 4094.
Specifies to match the packets with a specified source MAC
address.
3-4
Chapter 3 QoS Policy Configuration
Description