Configuring Authentication And Authorization For Accessing Ftp Server - H3C S5500-EI series Operation Manual

Operation Manual – File System Management
H3C S5500-EI Series Ethernet Switches
result in file corruption on the router. This mode, however, consumes less memory
space than the fast mode.
Follow these steps to configure the FTP server:
Enter system view
Enable the FTP server
Configure the idle-timeout
timer
Set the file update mode
in FTP
2.3.2 Configuring Authentication and Authorization for Accessing FTP
Server
To allow an FTP user to access certain directories on the FTP server, you need to
create an account for the user, authorizing access to the directories and associating the
username and password with the account.
Follow these steps to configure authentication and authorization for FTP server:
Enter system view
Create a local user and
enter its view
Assign a password to the
user
To do...
system-view
ftp server enable
ftp timeout minutes
ftp update { fast |
normal }
To do...
system-view
local-user user-name
password { simple |
cipher } password
Use the command...
Use the command...
2-8
Chapter 2 FTP Configuration
Remarks
—
Required
Disabled by default.
Optional
30 minutes by default.
In idle-timeout time, if
there is no information
interaction between the
FTP server and client, the
connection between them
is terminated.
Optional
Normal update is used by
default.
Remarks
—
Required
No local user exists by
default, and the system
does not support FTP
anonymous user access.
Required