Protocols And Standards; Rrpp Configuration Task List - H3C S5500-EI series Operation Manual

Operation Manual – RRPP
H3C S5500-EI Series Ethernet Switches
In this case, to prevent from generating this loop, the edge node will block the edge port
temporarily. The blocked edge port is activated only when the edge node ensures that
no loop will be brought forth when the edge port is activated.

1.1.5 Protocols and Standards

Related standard: RFC 3619.

1.2 RRPP Configuration Task List

Complete the following tasks to configure RRPP
Configuring Master Node
Configuring Transit Node
Configuring Edge Node
Configuring Assistant Edge Node
Task
1-9
Chapter 1 RRPP Configuration
Description
Required
Optional
Optional
Optional