Ipv6 Routing Information Filtering Failure - H3C S5500-EI series Operation Manual

Operation Manual – IPv6 Routing
H3C S5500-EI Series Ethernet Switches
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::7D58:0:CA03:1
Dest 10::/32,
via FE80::7D58:0:CA03:1, cost
Dest 20::/32,
via FE80::7D58:0:CA03:1, cost
Dest 40::/32,
via FE80::7D58:0:CA03:1, cost
6.6 Troubleshooting Routing Policy Configuration

6.6.1 IPv6 Routing Information Filtering Failure

I. Symptom
Filtering routing information failed, while routing protocol runs normally.
II. Analysis
At least one item of the IPv6 prefix list should be configured as permit mode, and at
least one node of the Route-policy should be configured as permit mode.
III. Processing procedure
1) Use the display ip ipv6-prefix command to display IP prefix list information.
2) Use the display route-policy command to display routing policy information.
Chapter 6 Routing Policy Configuration
on Vlan-interface 100
1, tag 0, A, 18 Sec
1, tag 0, A, 8 Sec
1, tag 0, A, 3 Sec
6-11