H3C S5500-EI series Operation Manual page 1064

Operation Manual – QoS
H3C S5500-EI Series Ethernet Switches
Configure accounting
action
Configure TP action
Configure traffic filtering
behavior
Configure traffic
mirroring action
Configure nested VLAN
tag action
Configure traffic redirect
action
Remark the customer
network VLAN ID for
packets
Remark DSCP value for
packets
Remark 802.1p
precedence for packets
Remark drop
precedence for packets
Remark IP precedence
for packets
Remark local
precedence for packets
Remark the service
provider network VLAN
ID for packets
II. Configuration example
1) Network requirements
Create a traffic behavior named test, configuring TP action for it, with the CAR being
640 kbps.
To do...
accounting
car cir committed-information-rate
[ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green
action ] [ red action ] [ yellow
action ]
filter { deny | permit }
mirror-to { cpu | interface
interface-type interface-number }
nest top-most vlan-id vlan-id
redirect { cpu | interface
interface-type interface-number |
link-aggregation group agg-id |
next-hop { ipv4-add [ ipv4-add ] |
ipv6-add [ interface-type
interface-number ] [ ipv6-add
[ interface-type
interface-number ] ] } }
remark customer-vlan-id
vlan-id-value
remark dscp dscp-value
remark dot1p 8021p
remark drop-precedence
drop-precedence-value
remark ip-precedence
ip-precedence-value
remark local-precedence
local-precedence
remark service-vlan-id
vlan-id-value
Chapter 3 QoS Policy Configuration
Use the command...
3-6
Remarks
Required
You can configure
the traffic behavior
as required.