Displaying And Maintaining Congestion Management - H3C S5500-EI series Operation Manual

Operation Manual – QoS
H3C S5500-EI Series Ethernet Switches
4.5.2 Configuration Examples
I. Network requirements
Configure
GigabitEthernet1/0/1.
Configure queue 0, queue 1, queue 2 and queue 3 on GigabitEthernet1/0/1 to be
in SP queue scheduling group.
Configure queue 4, queue 5, queue 6 and queue 7 on GigabitEthernet1/0/1 to be
in WRR queue scheduling group, with the weight being 2, 4, 6 and 8 respectively.
II. Configuration procedure
# Enter system view.
<Sysname> system-view
# Enable the SP+WRR queue scheduling algorithm on GigabitEthernet1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 1 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 2 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 3 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 4 group 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wrr 5 group 1 weight 4
[Sysname-GigabitEthernet1/0/1] qos wrr 6 group 1 weight 6
[Sysname-GigabitEthernet1/0/1] qos wrr 7 group 1 weight 8

4.6 Displaying and Maintaining Congestion Management

Display WRR queue
configuration information
Display SP queue
configuration information
to adopt
To do...
display qos wrr
interface [ interface-type
interface-number ]
display qos sp interface
[ interface-type
interface-number ]
Chapter 4 Congestion Management
SP+WRR queue
Use the command...
4-7
scheduling algorithm
Remarks
Available in any view
on