Configuring A Wrr Queue - H3C S5500-EI series Operation Manual

Operation Manual – QoS
H3C S5500-EI Series Ethernet Switches
To do...
Enter system
view
Enter
port
view or
port
group
view
Configure SP
queue
scheduling
algorithm
4.3.2 Configuration Examples
I. Network requirements
Configure GigabitEthernet1/0/1 to adopt SP queue scheduling algorithm.
II. Configuration procedure
# Enter system view.
<Sysname> system-view
# Configure an SP queue for GigabitEthernet1/0/1 port.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos sp

4.4 Configuring a WRR Queue

By default, SP queue scheduling algorithm is adopted on all the ports. You can adopt
WRR queue scheduling algorithm as required.
4.4.1 Configuration Procedure
Follow these steps to configure WRR queues:
Use the command...
system-view
Enter
interface interface-type
port
interface-number
view
Enter
port-group { manual
port
port-group-name |
group
aggregation agg-id }
view
qos sp
Chapter 4 Congestion Management
—
Perform either of the two
operations.
The configuration performed in
Ethernet port view applies to the
current port only. The
configuration performed in port
group view applies to all the ports
in the port group.
Required
By default, all the ports adopt the
WRR queue scheduling
algorithm, with the weight values
assigned to queue 0 through
queue 7 being 1, 2, 3, 4, 5, 9, 13,
and 15.
4-4
Remarks