H3C S5500-EI series Operation Manual page 1273

Operation Manual – System Maintaining and Debugging
H3C S5500-EI Series Ethernet Switches
Table 3-1 Commonly used pluggable transceivers
Transceiver type
SFP (Small
Form-factor
Pluggable)
GBIC (GigaBit
Interface
Converter)
XFP (10-Gigabit
small Form-factor
Pluggable)
XENPAK (10
Gigabit EtherNet
Transceiver
Package)
Note:
For pluggable transceivers supported by S5500-EI series Ethernet switches, refer to
H3C S5500-EI Series Ethernet Switches Installation Manual.
II. Identifying pluggable transceivers
As pluggable transceivers are of various types and from different vendors, you can
perform the following configurations to identify main parameters of the pluggable
transceivers, including transceiver type, connector type, central wavelength of the laser
sent, transfer distance and vendor name or vendor name specified.
Follow these steps to identify pluggable transceivers:
Display main parameters of
the pluggable
transceiver(s)
Display part of the electrical
label information of the
anti-spoofing transceiver(s)
customized by H3C
Applied
environment
Generally used for
100M/1000M
Ethernet
interfaces or POS
155M/622M/2.5G
interfaces
Generally used for
1000M Ethernet
interfaces
Generally used for
10G Ethernet
interfaces
Generally used for
10G Ethernet
interfaces
To do...
display transceiver
interface [ interface-type
interface-number ]
display transceiver
manuinfo interface
[ interface-type
interface-number ]
Whether can be
an optical
transceiver
Yes
Yes
Yes
Yes
Use the command...
3-5
Chapter 3 Device Management
Whether can be
an electrical
transceiver
Yes
Yes
No
Yes
Remarks
Available for all
pluggable transceivers
Available for
anti-spoofing pluggable
transceiver(s)
customized by H3C
only